Blue FILTER button: change the cartridge, then press the button to reset.
Model compatibility: Viking reuses codes across series and model years, so WATER FILTER may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The FILTER button lights blue when the water filter needs changing.
The FILTER button glowing blue is a replacement prompt on a Viking 7 Series integrated refrigerator, not a malfunction. The icon stays hidden until a change is due, so an unlit button needs no action.
Source of the reminder
In Viking’s list of alarm display codes, a blue FILTER button signals that the filter should be changed.
Filter location
You will find it at the lower right behind the bottom freezer drawer. It serves the water dispenser built into the left wall of the fresh food section.
Replacement steps
Press the old filter in and give it a quarter turn counterclockwise.
Draw it out.
Press in the new filter, turn it a quarter turn clockwise and release.
Press FILTER to reset the indicator.
The part is RWFDISP; Viking points owners to its product information page to order.
Reset wording
The operation section says to press the button after changing the filter, while the alarm table says the light goes out once the change is done. Press it. A light that is already off means you are finished.
If the light remains after the new cartridge, phone (310) 692-1112 about your Viking in Los Angeles and mention the 7 Series integrated model. More: refrigerator repair.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Viking appliance?
Book a specialist visit for a clear estimate and approval before any repair.
